10
BATTERY TROUBLESHOOTING
1. If the machine switches off automatically, the machine electronics have activated
automatic protection mode. A warning signal sounds (continuous beeping). The
beeping stops after a maximum of 30 seconds or when the trigger is released. In spite
of this protective function, overloading is still possible with certain applications and can
result in damage to the machine.
Causes and Remedies:
1. Battery almost empty:
The electronics protect the battery pack against damage
through total discharge). If one LED is flashing, the battery pack is almost depleted. If
necessary, press the button and check the LEDs to see the charge level. If the battery
pack is almost depleted, it must be recharged.
2. Long continuous overloading of the machine:
This will activate the temperature
cut-out. Leave the machine or battery pack to cool.
Note:
If the battery pack feels
very warm, the pack will cool more quickly in an “AIR COOLED” charger.
Note:
The
machine will cool more quickly if you operate it at idling speed.
3. Safety Shutdown:
The machine was SWITCHED OFF automatically. If the slew
rate of the current is too high (for example, if the machine suddenly seizes or kickback
occurs), the machine switches off. Switch off the machine at the trigger. Switch it on
again and continue to work as normal. Try to prevent the machine from seizing.
Note: The LED lamp switches off automatically after a specific time. To activate
the electronic functions, press the trigger.
