VAD
12.03
1
TO.330
T
.
-
-
-
-
16
V5VV80
MEDIUM
BEFESTIGUNG
Anschlüsse
Umschaltsystem
Nenndurchmesser
Nennfördermenge
Betriebsdruck
Umschaltzeit
Ausschaltzeit
Umgebungstemperatur
Temperatur des Mediums
Material des Körpers
Material der Dichtungen
Einschaltdauer ED
Schutzart der Steckverbinder
Gewicht (ohne Steckverbinder)
Stromaufnahme
G 1/8
Spule
5 mm
1000 NI/min (6 bar)
1 ÷ 10 bar
17ms
24 ms
-10° ÷ + 50° C
+ 5° ÷ + 80° C
Technopolymer
NBR
100%
IP 65 (DIN 40050)
0.261 kg
je nach Spule (siehe Rückseite)
FLUIDE
FIXATION
Raccords
Système de commutation
Diamètre nominal
Débit nominal
Pression de service
Temps de commutation
Temps de déclenchement
Température ambiante
Température du fluide
Matériau du corps
Matériau des joints
Durée de l’enclenchement ED
Degré de protection des connecteurs
Poids (sans connecteurs)
Absorption électrique
AIR COMPRIMÉ FILTRÉ, LUBRIFIÉ OU PAS MOYENNANT DES
TROUS PASSANT SUR LE CORPS Ø 3 OU Ø 4
G 1/8
Va et vient
5 mm
1000 NI/min (6 bar)
1 ÷ 10 bar
17 ms
24 ms
-10° ÷ + 50° C
+ 5° ÷ + 80° C
Technopolymère
NBR
100%
IP 65 (DIN 40050)
0.261 kg
En fonction de la bobine (voir au dos)
FLUIDO
FISSAGGIO
Attacchi
Sistema di commutazione
Diametro nominale
Portata nominale
Pressione di esercizio
Tempo di commutazione
Tempo di disinserzione
Temperatura ambiente
Temperatura del fluido
Materiale corpo
Materiale guarnizioni
Durata dell’inserimento ED
Grado di protezione dei connettori
Peso (senza connettori)
Assorbimento elettrico
ARIA COMPRESSA FILTRATA, LUBRIFICATA E NON
MEDIANTE FORI PASSANTI SUL CORPO Ø3 O Ø4
G 1/8
Spola
5 mm
1000 NI/min (6 bar)
1 ÷ 10 bar
17 ms
24 ms
-10° ÷ + 50° C
+ 5° ÷ + 80° C
Tecnopolimero
NBR
100%
IP 65 (DIN 40050)
0.261 kg
In relazione alla bobina (vedi retro)
FLUID
COMPRESSED, FILTERED, LUBRICATED OR NON-
FIXING
LUBRICATED AIR THROUGH Ø3 OR Ø 4 HOLES IN THE BODY
Connections
G 1/8
Switching system
Spool
Nominal diameter
5 mm
Normal rated flow
1000 Nl/min (6 bar)
Operating pressure
1 ÷ 10 bar
Switching time
17 ms
Unswitching time
24 ms
Ambient temperature range
-10°C - + 50°C
Fluid temperature
+ 5°C - + 80°C
Body material
Tecnopolymer
Seals material
NBR
Duration of ED connection
100%
Protection degree of connectors
IP 65 (DIN 40050)
Weight (without connectors)
0.261 kg
Power absorbed
Depends on coil (please turn page)
GESCHMIERTE UND NICHT GESCHMIERTE GEFILTERTE DRUCKLUFT
MITTELS DURCHGEHENDER BOHRUNGEN AUF GEHÄUSE Ø 3 ODER Ø 4
ACCESSORIES
ZUBEHÖR
ACCESSOIRES
ACCESSORI