5
ASSEMBLY INSTRUCTIONS
In order to prevent removal of the post from the base use a hammer and flat end punch to hammer the jack's
tab in toward to post but not touching the post. Same stands are equipped with a bolt instead of the tab. In
this case the bolt can be threaded in toward the post until the bolt bottoms out.
1. Connect the pin assembly (NO.4) to the base
(NO.3).
3. Insert the top pillar assembly (NO.1) into the
column (NO.2), and use the pin assembly (NO.4)
to affix firmly.
2. Insert the column (NO.2) to the base (NO.3) with
spring washer (NO.5) and the bolt (NO.6).
4. Assembly is now complete.
