background image

8

WARRANTY

ONE YEAR LIMITED WARRANTY

Torin® has been producing quality automotive repair and maintenance products since 1968. All products are sold are felt to 

be of the highest quality and are covered by the following warranty:

With proof of purchase for a period of one year from the date of that purchase, the manufacturer will repair or replace, at its 

discretion, without charge, any of its products or parts thereof which fail due to a defect in material or workmanship.

This warranty does not cover damage or defects caused by improper use, careless use or abuse of the equipment. This 

warranty does not cover parts normally considered to wear out or be consumed in the normal operation of the equipment. 

AND EXCLUSIVE REMEDY SHALL BE THE REPAIR OR REPLACEMENT OF DEFECTIVE PRODUCTS AS DESCRIBED 

ABOVE,  and  (2)  THE  MANUFACTURER  SHALL  NOT  BE  LIABLE  FOR  ANY  CONSEQUENTIAL  OR  INCIDENTAL 

 

DAMAGE  OR  LOSS  WHATSOEVER,  and  (3)  THE  DURATION  OF  ANY  AND  ALL  EXPRESSED  AND  IMPLIED 

 

WARRANTIES, INCLUDING, WITHOUT LIMITATION, ANY WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A 

PARTICULAR PURPOSE, IS LIMITED TO A PERIOD OF ONE YEAR FROM DATE OF PURCHASE.

For any technical questions or warranty support please contact: 

Torin® Customer Service directly by telephone at 1-888-44-TORIN (1-888-448-6746) 

8:00am - 4:30 pm Pacific Time, Monday - Friday. 

Alternately Customer Service can be reached through www.torinjacks.com or via email at info@torinjacks.com. 

Summary of Contents for T815016LT









Reviews: