Tork DGS100A, Instruction Manual

8

7.0 REVIEW, MODIFY AND DELETE

     Press 

MODE

 to advance to any of the following   

     MODES:

     1 . 

AUTO MODE

: In this automatic mode, the unit will  

     execute the scheduled programs . Time, day, seconds 

     and load status are displayed . C1is displayed when        

     Duty Cycle is programmed and operating .

     OVERRIDE IN AUTO MODE

: The load status of the  

     channel can be manually changed by pressing the 

     OVRD

 key . The unit will stay in this position until the  

     next scheduled event . A flashing LCD load indication 

     (ON, OFF) shows the status was changed by the 

     override not a scheduled event . Press the 

OVRD

 key 

     until ON or OFF stops flashing to return to programmed 

     setting .

     2 . 

MAN MODE

: In this manual mode, the unit will 

     ignore the schedule programs . Time, day, seconds 

     and load status are displayed . This can be used as a 

     VACATION SETTING to keep load off while away . Use 

     override to set to OFF position .

     OVERRIDE IN MAN MODE

: The load status of the 

     channel can be manually changed by pressing the 

     OVRD

 key . The unit will stay in this position until 

     OVRD

 is pressed again .  A flashing LCD load 

     indication (ON, OFF) shows the status was changed by 

     the override not a scheduled event .

     3 .

 CLOCK MODE

: Press 

HOUR

 and 

MIN

 to modify   

     existing settings . Press 

ENTER

 to save changes .

     4 . 

DATE MODE

: Press 

MONTH

, 

DATE

 and 

YEAR

 to 

     modify existing settings . Press 

ENTER

 to save 

     changes . DAY is automatically adjusted .

     5 . 

DSt MODE

: Factory default is set at US standard