6
Follow the same procedures above to set the second
signal or duty cycle entries .
Press
MODE
key to advance to next screen .
6.0 SCHEDULE SET MODE
Press
MODE
key until display shows:
6.1 SETTING HOURS, MINUTES, AND DAYS
Note:
A schedule is needed for each event . If a typical
ON/OFF pair is required, use SCH 01 for the ON
event and SCH 02 for the OFF event .
Press the
HOUR
, and
MIN
keys to set the desired time .
Press
EVENT
to set desired event
(ON or OFF, C1, or C2)
Note:
C1 or C2 will not be displayed if the duty cycle
durations are not set in Step 5 .
Press
DAY
to set desired day(s) .
Note
: With each
DAY
button push a different group of
days will appear .
