background image

11

8.0 REVIEW, MODIFY AND DELETE.

Press 

MODE

 to advance to any of the following MODES:

1. CLOCK MODE: Press 

HOUR

 and 

MIN

 to modify existing 

settings. Press 

ENTER

.

2. DATE MODE: Press 

MONTH

DATE

 and 

YEAR

 to modify 

existing settings. Press 

ENTER

. DAY is automatically adjusted.

3. DST Daylight Saving Time: To review press 

ENTER

. To 

modify press 

MONTH

DAY

 and 

DATE

 to change existing  

setting. Press ENTER.

4. HOLIDAY MODE: Press 

ENTER

 to modify dates. Press the 

MONTH

, and 

DATE

 keys to set the date to the desired start 

date (HdAY01 ON).

Press the 

ENTER

 key For a single day holiday skip the OFF 

screen  and press the 

ENTER

 key

For a block of dates set the OFF date for the end of the 

holiday block. 

Press the 

MONTH

, and 

DATE

 keys to set the date to the de-

sired end date (HdAY01 OFF)

Press the 

ENTER

 key.

5. SCHEDULE MODE: Press 

ENTER

 to advance to desired 

event. Press 

HOUR

MIN

 and 

EVENT

 to modify setting. Press 

DAY

 to modify days, 

DEL

 to delete. Press 

ENTER

 after each 

modification.

6. ASTRO MODE: Press 

CH1/CH2

 to select desired channel. 

Press

 LAT

 to change latitude. Press 

ENTER

. Press 

DAY

 to add 

or delete days in the sunset mode. Press 

ENTER

. Press 

HOUR 

and/or 

MIN

 to change offset time for sunset. Press 

EVENT

 to 

change offset from 

+

 to 

. Press 

ENTER

 and follow the same 

procedure above to modify or review sunrise settings.

7. RUN MODE: The time, day, seconds, the status

of both channels and 

AUTO

 is displayed.

 

Summary of Contents for EWZ101C

























Reviews: