8
Step 6
•
Slide the GSRU main bracket in the mounting plate slots towards
the inside of the door until the vertical portion of the main bracket
contacts the threshold molding. (See figure 6.1)
•
While holding the main bracket in po
sition, tighten the 3/8”
hardware holding the main bracket to each mounting bracket to 25
in-lbs (2.8 Nm)
•
Installation is complete.
Figure 5.2
1/4” x 1”
Stainless Steel
Lag Screws
Figure 6.1
Tighten
Hardware
Push
Push