INSTALLATION
2. Attach two cable tie anchors to the left top panel with two M5 × 0.8 - 10 screws.
Figure 11: Location to attach two cable tie anchors.
Install the Right Top Panel
1. Attach the right top panel to the panels on the right side of the enclosure with nine M5 × 0.8 - 10 screws.
Figure 12: Right top panel attached to the right side of the enclosure.
Page 11
©Tormach® 2022
Specifications subject to change without notice.
tormach.com
TD10711: Installation Guide: 1100MX Enclosure Kit (0522A)