Drawing Tools
UM10138_0712A
66
Tormach® CNC Scanner
12.2.2
To draw an arc by specifying three points
1.
Choose
Draw > Arc
2.
Specify the start point.
3.
Specify a second point.
4.
Specify the endpoint.
12.2.3
Draw Arcs by Specifying Start, Center, End
Using command line prompts for drawing arc, draw an arc by specifying center, start point and end
point.
Start point (A), second point (B), and endpoint (C)
Drawing an arc by specifying three points
Drawing an arc by specifying three points. The start point of the arc (1) snaps to the endpoint of a line. The
second point of the arc (2) snaps to the middle circle in the illustration.