PowerSlide 7
ENGLISH
••••••
•••
••••••
•••
••••
••••
••••
MM/YY
PROG
••••
FAAC S.p.A. Soc. Unipersonale
Via Calari, 10 - 40069 Zola Predosa BOLOGNA
Italy
1
3.7 TECHNICAL CHARACTERISTICS
The PowerSlide series gear motors are equipped with an electronic
board that controls their automatic operation (§ ). The travel of the
gate is determined by two magnetic limit switches. Movement cannot
be reversed: To operate the gate manually, follow the instructions in
§ . The board may be equipped with optional accessories:
-
obstacle recognition encoder (optional accessory in some mo-
dels);
-
Radio receiver E43-I.
3.4 EMERGENCY USE
3.6 PRODUCT IDENTIFICATION
5
Technical Data
PowerSlide
Supply voltage
230 V~ (+6%…-10%) 50 Hz
Electric motor
Asynchronous single phase
Start-up capacitor
12.5 µF
Max power
540 W
Thermal protection
140 °C (automatic rearming)
Max thrust force
590 N
Starting thrust force
410 N
Pinion
Z16 Module 4
Max sliding gate section length
15 m
Max. sliding gate section weight*
900 kg
Sliding gate section speed
12 m/min
Ambient operating temperature
-20 °C - +55 °C
Type of use
Residential/Condominium
Continuous use time (ROT)**
23 min
Ingress Protection
IP44
Dimensions (LxDxH)
297x170x256
Gear motor weight
10 kg
Electronic board
SPRINT 382
* In the case of a cantilevered door, the maximum weight of the
sliding gate section is reduced by 30%.
** 20°C,
FO
=
20
(
§
).
3.5 PRODUCT WARNINGS
Risk of fingers and hands being trapped between the rack, pinion and
casing (
2
).
In any case the beam is not behaving properly, in emergencies or
if there is a fault, turn off the power supply to the automation and
disconnect the buffer batteries if there are any. If the leaf can be
moved safely by hand, use the MANUAL OPERATION mode; otherwise
place the automation out of service until it has been reset/repaired.
In the case of a breakdown, the automation must be reset/repaired
exclusively by the installer/maintenance technician.
IDENTIFICATION NUMBER
Month/year of prod
progressive number for the
month of production
E.g.:
0115 0001
Product name
Sales code
FAAC S.p.A. Soc. Unipersonale
Via Calari, 10 - 40069 Zola Predosa BOLOGNA
Italy
POWERSLIDE
Summary of Contents for POWERSLIDE
