22
TROUBLESHOOTING GUIDE
The checking of all the other foreseen machine
operations is left to the authorized technical as-
sistance.
SIGNALS ON THE DISPLAY
A001: Indication of the version of the electronic
check card (the last
number indicates the revision of the check card).
Pb24: Indication battery check card set for lead
batteries.
GE24: Indication battery check card set for gel
batteries.
---- (blinking): signal indicating the discharged
batteries
THE SUCTION MOTOR DOES NOT WORK
1. Verify that the key switch (8) is in the correct
position.
2. Check the charge level of the batteries.
3. Check that the battery connector is correctly
plugged in.
4. Verify that the switch (6) is on.
5. Check that the red connector of the suction
motor (1) is correctly plugged in.
If the problem persists, please contact the autho-
rized technical assistance.
THE BASE MOTOR DOES NOT WORK
1. Verify that the key switch (8) is in the correct
position. Switch off and on again the machine.
2. Check the charge level of the batteries.
3. Check that the battery connector is correctly
plugged in.
4. Verify that the switch (5) is on.
5. Act upon the levers drive control (9).
If the problem persists, please contact the autho-
rized technical assistance.
https://harrissupplyind.com - To Order Parts Call 608-268-8080
