15
HORN
The machine is equipped
with a horn which is activated
pressing the push button (1).
with the brake inserted, the
lamp (2) comes on.
When the backwards
movement is selected
the squeegee is brought
automatically to the upper
position. It will then lower
again in the following forward
movement. This happens both
in automatic and in manual
mode in order to protect the
integrity of the squeegee.
WORKING IN AUTOMATIC
MODE
The automatic operation
is useful to simplify the
operator’s work.
1. Activate the machine (see
under paragraph “STARTING
OF THE MACHINE”).
2. Pressing the push button
(3) the automatic (AUTO)
functioning is chosen. When
the signal lamp (4) is on, then
the machine is functioning in
automatic (AUTO) mode.
3. Check that the knob of
the solution valve (5) is in
the position of optimum
flow, depending on the type
of floor and the type of dirt
(see under the paragraph
“FLOW ADJUSTMENT OF THE
DETERGENT SOLUTION”).
4. Position the selector (1)
forward to choose the forward
drive.
5. Adjust the movement
speed in forward with the
push button (2) (see under
paragraph “FORWARD AND
BACKWARD MOVEMENT”).
WORKING BRAKE
To stop the machine during
normal working situations,
it is sufficient to release the
accelerator pedal, because
the machine has an electronic
brake system. To restart, press
again the accelerator pedal.
PARKING BRAKE
The machine is equipped with
a parking brake on the traction
motor wheel that operates at
the complete release of the
accelerator pedal or when the
machine is without batteries.
In case of an emergency or
simply to stop the machine,
it is sufficient to release
the accelerator pedal. The
brake remains on until the
accelerator pedal is pressed
again.
When the batteries are
connected and when the key
switch (A) is positioned on 1,
with the brake inserted, the
lamp (2) comes on.
MANUAL MOVEMENT OF
THE MACHINE
To move the machine
manually, it is necessary to
unblock the parking brake
that blocks the traction
motor wheel. To do this, keep
the lever (3) lifted. With the
delivery of the machine we
also supply a cord that permits
the lever operation (3). After
having moved the machine,
take off the cord and keep it
for eventual re-use.
ATTENTION:
When the parking brake is
released manually, for example
when the machine has to be
moved without batteries, avoid
slopes and do not park on
them either.
AUTOMATIC SQUEEGEE
LIFTING WHEN GOING
BACKWARDS