23
MATERIAL
CHARACTERISTICS
PPL (Polypropylene)
Good wear resistance. Maintains characteristics with hot water up to
50°C. It is not hygroscopic.
NYLON
Excellent wear resistance, even with hot water. It is hygroscopic.
TYNEX
Nylon bristles with grains of abrasive material. Use with caution in order
not to mark the floor or ruin the polishing.
BRISTLES THICK-
NESS
Thicker bristles are more rigid and must be used on smooth floor or floor
with small joints. On irregular floors with deep joints or relieves, it is rec-
ommended to use softer bristles which penetrate more easily and deep-
er. Please be aware that when brush bristles are worn out and therefore
too small, they become rigid and unable to penetrate and clean deeper.
This may also happen with thicker bristles creating brush vibration.
PAD HOLDER
It is equipped with anchor points which permit the blocking of the abra-
sive pad during work. The pad is recommended to clean smooth floors.
MACHINE
CODE
QTY DESCRIPTION
USE
BD 26/27 48903020
2
Brush PPL 0,6 Ø 345
Normal floors.
48903030
2
Brush PPL 0,9 Ø 345
Smooth floors with small joints and
persistent dirt.
48903040
2
Brush TYNEX Ø 345
Floors of resistant material and particularly
dirty.
48903050
2
Brush 5-mix Ø 345
For all types of floors.
48803010
2
Pad holder Ø 330
For pads of 14”, for smooth surfaces
cleaning.
48803030
2
Pad holder Ø 330 +
center lock green
For pads of 14”, for smooth surfaces
cleaning.
48803040
2
Pad holder Ø 330 +
center lock black
For pads of 14”, for smooth surfaces
cleaning.
RECOMMENDED BRUSHES
Brushes must be chosen depending on type of floor and dirt to be removed. The employed
material and the bristles diameter are the elements that distinguish different types of brushes.
