background image

9

Symbol denoting the switch 

for the water opening and 

the signal lamp that the 

water is open.

Symbol denoting the func-

tioning of the solution valve 

adjusting the flow of the 

detergent solution.

Indication of the maximum 

temperature of the detergent 

solution. It is placed near the 

charging hole of the solution 

tank.
Symbol denoting the selec-

tion of the operation mode 

in manual.

Symbol denoting the selec-

tion of the operation mode 

in automatic.

Symbol denoting the selec-

tion of the mode at the end 

of the washing and transfer.

Symbol denoting the activa-

tion and the signal lamp 

brushes down.

Symbol denoting the activa-

tion of the brushes up.

Symbol denoting the activa-

tion and the signal lamp of 

the side brush.

Symbol denoting the signal 

lamp of the brushes rotation.

Symbol denoting the push 

button to visualize on the 

display the brushes pres-

sure se

t.

Rollbar lowered of 120 mm

Movable working lights

OPTIONAL ACCESSORIES

Symbol denoting the 

functioning of the adjust-

ment selector of the 

brushes pressure.

Symbol denoting the acti-

vation and the signal lamp 

squeegee down.

Symbol denoting the acti-

vation of the squeegee up.

Symbol denoting the 

switch and the signal lamp 

of the functioning of the 

suction motors.

Symbol denoting the 

charge level of the batter-

ies.

Symbol denoting the push 

button to visualize the hour 

meter on the display.

Symbol denoting the selec-

tion of the forward/back-

ward movement.

Symbol denoting the 

selection switch of the 

operation speed.

Symbol denoting the 

signal lamp of the parking 

brake on.

Symbol denoting the key 

switch.

Symbol denoting the push 

button of the horn.

Symbol denoting the sig-

nal lamp of low detergent 

solution.

Symbol denoting the 

signal lamp of overflow of 

the recovery tank.

Symbol denoting the 

signal lamp of restoration 

level liquid brakes.

Symbol denoting the 

open book. Indicates that 

the operator has to read 

the manual before the 

use of the machine.
Warning symbol.

Read carefully the sec-

tions marked with this 

symbol, for the security of 

both the operator and the 

machine.

https://harrissupplyind.com - To Order Parts Call 608-268-8080

Summary of Contents for 99795

























Reviews: