15
Accessories
Transport Trolley
The easily fitted trolley provides for ease in movement when transporting the machine.
Using the Trolley
1. Empty all liquid from the machine.
2. With the machine handle in the upright position place the trolley in the middle
alongside the machine.
3.
Hold the machine firmly, strap the Velcro with the machine to fix the trolley.
4. Make sure that the Velcro strap is securely wrapped around the bottom
handle.
5. The trolley is ready for use. The machine can be maneuvered easily while
holding the top handle.
Side Brush
The side brush can be used to clean corners near the walls. Switch off and unplug the machine
before fitting the side brush.
Warning:
Do not use side brush in a room with no mop boards, otherwise, the wall may get dirty.
Fitting the Side Brush
1. Remove the front brush and brush shaft.
2. Fix the shield assembly on the side plate
3. Insert the side brush through the shield and main brush.
Using the Side Brush
1. Tilt the machine at an angle that will allow the rear brush to collect the dirty
water.
2. Use side brush only for washing the edges.
