Tornado CV 30/1, Operation Manual

– 3

Caution

Risk of injury and damage! Note the weight 
of the appliance in case of storage.

This appliance must only be stored in inte-
rior rooms.



Danger

First pull out the plug from the mains before 
carrying out any tasks on the machine. 



Clean the brush roller.



Check the wear of the brush roller.

Note:

 The degree of the wear is shown by 

a comparison with the indicator bundle of a 
different colour. When the black bristles are 
at the same height as the red ones, replace 
the brush roller.



Dismount the brush cover if necessary: 
Turn the turn-lock fasteners by 90° and 
remove the brush cover.



Cut hair and threads that have got 
wound on the brush roller using a pair of 
scissors or just remove them.



Unlock and remove the filter cover.

Illustration 



Turn the locking mechanism of the filter 
bag towards the right. Close, remove, 
and dispose of the filter bag.

Illustration 



Insert a new filter bag and turn the lock-
ing mechanism of the filter bag towards 
the left.



Insert and lock filter cover.



Unlock and remove the filter cover.



Push the locking mechanism of the filter 
casing upwards and remove the filter 
casing.



Remove the exhaust filter from the filter 
housing.



Insert new exhaust filter into filter hous-
ing.



Insert and click the filter housing into its 
place.



Insert and lock filter cover.



Unlock and remove the filter cover.



Push the locking mechanism of the mo-
tor protection filter upwards. Remove 
and dispose of the motor protection fil-
ter.



Install and lock the new motor protec-
tion filter.



Insert and lock filter cover.



Dismount the side part by means of a 
coin.



Pull out the brush roller and dispose of.



Insert a new brush roller.



Reinstall side part.

Storage

Maintenance and care

Maintenance intervals

Daily

Weekly

Cleaning the brush roller

Replacing the filter bag

Replace exhaust filter

Replace motor protection filter

Replacing the brush roller

10

EN