Tornado CV 30/1, Operation Manual

– 4



Danger

First pull out the plug from the mains before 
carrying out any tasks on the machine. 

Illustration 

Illustration 

Illustration 

Note:

 If necessary, dismount brush cover 

(refer to "Cleaning of the brush roller").

–

No electrical voltage.



Check the receptacle and the fuse of 
the power supply.



Check the power cable and the power 
plug of the device.

–

Thermostat switched off the motor be-
cause of overheating



Replace blocked filters or remove 
blockages from the suction hose.

The unit is operational again after it has 
cooled down.

Note:

 The brush roller is equipped with a 

slip clutch that disengages when oversized 
or blocking objects are sucked in.

Note:

 The clutch is re-engaged after the 

unit is switched off. This produces a loud 
rattling sound.



Check the brush roller for obstructing 
objects and remove them if necessary.

The noise can not be heard when the unit is 
switched back on.



Check the brush roller for obstructing 
objects and remove them if necessary.



Remove obstructions from brush head, 
suction pipe and suction hose.



Replace the filter bag.



Replace exhaust air filter or motor pro-
tection filter.



Check the pile height adjustment knob 
for correct adjustment.



Replace the brush roller.



Remove obstructions from brush head, 
suction pipe and suction hose.



Replace the filter bag.

The warranty terms published by the rele-
vant sales company are applicable in each 
country. We will repair potential failures of 
your appliance within the warranty period 
free of charge, provided that such failure is 
caused by faulty material or defects in man-
ufacturing. In the event of a warranty claim 
please contact your dealer or the nearest 
authorized Customer Service centre. 
Please submit the proof of purchase.

–

Only use accessories and spare parts 
which have been approved by the man-
ufacturer. The exclusive use of original 
accessories and original spare parts 
ensures that the appliance can be oper-
ated safely and trouble free.

–

At the end of the operating instructions 
you will find a selected list of spare parts 
that are often required. 

–

For additional information about spare 
parts, please go to the Service section 
at www.tornadovac.com.

Troubleshooting

Remove blockings

Suction pipe/suction hose

Suction hose on the brush head

Brush roller/brush head

Motor does not run

Rattling noise when switched off

Unsatisfying suction result

The red indicator lamp is ON

Warranty

Accessories and Spare Parts

11

EN