Tornado OB 28/20, Operation & Maintenance Manual

10

BEFORE USE

HANDLING OF THE PACKED MACHINE

The machine is supplied with suitable packing 

foreseen for fork lift truck handling.

For the package dimensions please look at the 

“TECHNICAL DESCRIPTION” table.

Do not place more than 2 packings on top of each 

other.

UNPACKING OF THE MACHINE

1. Remove the external packing.

2. Unscrew the brackets (1) that secure the machine 

to the pallet.

3. Provide for an inclined base. 

4. Move the machine backwards, as indicated in the 

figure, avoiding heavy contacts to mechanical parts.

5. Keep the pallet and the brackets for eventual 

transport.

The portable slope is not included in the packaging.

ACCESS TO THE BATTERY COMPARTMENT

To reach the battery compartment, first of all make 

sure that the recovery tank (1) is empty by opening 

the cover (2).

If the tank is full, proceed as indicated under 

“RECOVERY TANK CLEANING”, otherwise take off the 

squeegee hose (3) and lift the tank.

Thanks to a blocking system of 2 levels, the machine 

allows the battery charging with a partial tank 

opening.

BATTERY INSTALLATION

The machine is equipped either with batteries in 

serial connection or elements of DIN-type assembled 

together and connected in series, placed in its 

appropriate compartment under the recovery 

tank and must be handled using suitable lifting 

equipment (due to weight, considering the type 

of batteries chosen, and coupling system).  The 

batteries must be in accordance with CEI 21-5 

Norms.

The batteries must be inserted as follows:

The machine and its battery check card foresee the 

use of traditional lead batteries.