background image

6

IMPORTANT SAFETY 

INSTRUCTIONS

Read and understand this owner’s manual and all labels on the unit 

before operating. Safety is a combination of common sense, staying 

alert, and knowing how your unit works. To reduce the risk of personal 

injury or damage to your unit use only as indicated in this manual.

FOR COMMERCIAL USE ONLY 

To reduce the risk of fire, electrical shock, or injury, 

the instructions below must be read and understood 

completely prior to machine operation

SAVE THESE INSTRUCTIONS

IMPORTANT:

 

 

The manufacturer cannot accept responsibility for 

damage caused when the appliance is not used according to the instructions, or for 

uses other than those for which it was intended.

WARNING: 

 

  This machine must only be used for the 

manufacturer’s approved application as 
described in this manual.

•  The machine must be unpacked and assembled 

in accordance with these instructions before 
connecting to the electrical supply.

•  Only genuine accessories and spare parts 

provided with the machine or those approved 
by the manufacturer should be used. The use 
of other accessories may impair the safety of 
the machine. All repairs must be performed by a 
qualified service agent.

•  

DO NOT

 modify the machine from its 

original design.

•  Operators must be fully trained in the use of the 

machine in accordance with these instructions 
and be able to perform regular user maintenance 
as outlined in this manual.

•  Operators should be physically capable to 

maneuver, transport and operate the machine.

•  Operators should be able to recognize 

unusual operation of the machine and report 
any problems.

•  This machine is not intended for use by persons 

(including children) with reduced physical, 
sensory or mental capabilities, or lack of 
experience and knowledge unless they have 
been given instruction concerning use of the 
machine and are under supervision by a person 
responsible for their safety.

•  Keep children and unauthorized persons away 

from the machine when in use. 

DO NOT

 use the machine as a toy.

•  

DO NOT

 use with a damaged cord or plug. If it 

has been damaged, left outdoors or dropped in 
water, return it to a service center for inspection 
and/or repair.

•  

DO NOT

 use where hazardous dust is present.

•  

DO NOT

 use in an explosive environment.

•  

DO NOT

 pick up or use near flammable or 

combustible fluids, hazardous dusts or vapors.

•  

CAUTION

 –If it is suspected that there is 

hazardous dust or flammable/corrosive material, 
stop cleaning the area immediately and consult 
your supervisor.

Summary of Contents for TE310-G15-U



















Reviews: