16
SQUEEGEE HOSE CLEANING
Weekly, or in case of insufficient suction, it is
necessary to check that the squeegee hose is
not obstructed. Eventually, to clean it, proceed
as follows:
1. Take off the hose from the squeegee
coupling (1) and release the guide spring of the
suction hose (2).
2. Wash the inside of the hose with a water jet,
from the squeegee hose side.
3. To reassemble the hose reverse the
operation.
CLEANING OF SOLUTION TANK AND FILTER
1. Bring the machine to an appropriate place
for tanks draining.
2. Unscrew the solution tank cap (1).
3. Unscrew the solution filter (2) being careful
not to lose or to damage the gasket.
4. Rinse with a water jet the solution tank.
5. Rinse the solution tank filter placed inside
the exhaust plug, under the machine
TWO-MONTHLY MAINTENANCE
FRONT SQUEEGEE RUBBER REPLACEMENT
Check the wear of the squeegee rubber and
eventually replace it.
For the replacement it is necessary to:
1. Take off the squeegee hose (3) from its
coupling.
2. Disassemble the squeegee from the support
rotating the lever (2) counterclockwise and
sliding the stud bolts (1) in their slots.
3. Uncouple the hook (1) of the rubber holder
blade, release the extremities (2) from the
squeegee body and take off the rubber (4).
Summary of Contents for TS120-S53-U
Page 20: ...20...