4
Your new Tornado unit is a
high quality, precision-made
product. All parts used in the
manufacturing of this unit have
passed rigid quality control
standards prior to assembly.
Please safeguard the original
receipt / invoice. If you
experience any problems with
your unit during the warranty
period, the original receipt
/ invoice will act as proof of
purchase. Contact Tornado for
any warranty inquiries.
GENERAL RULES OF SAFETY
The rules below have to be
followed carefully in order to
avoid injury to the operator
and damage to the machine.
− Read the labels carefully
on the machine. Do not cover
them for any reason and
replace them immediately if
damaged.
− ATTENTION: The machine
must be used exclusively by
authorized staff that have been
instructed on its correct and
proper use.
− ATTENTION: Do not use the
machine on areas having a
higher gradient than the one
stated on the number plate.
− ATTENTION: The machine
is not to be used by persons,
children included, with
reduced physical, sensorial
or mental capabilities, or
with lack of experience or
knowledge, unless they
could benefit, through the
intermediation of a responsible
person for their safety, by a
supervision or instructions
concerning to its use.
− During the operation of the
machine, pay attention to
other people and especially to
the children.
− Children shall not play with
the machine.
− Children cannot carry out
cleaning and maintenance of
the machine.
TRANSFER
− Do not strike shelvings or
scaffoldings where there is
danger of falling objects.
− Leaving the machine in
parking position, remove the
key and apply the parking
brake.
− Do not use the machine as a
means of transport.
− Adapt the working speed
to the conditions: particularly,
slow down before narrow
curves have to be faced.
STORAGE AND DISPOSAL
− Storage temperature:
between 32°F and 131°F
(0°C and +55°C).
− Perfect operating
temperature: between 32°F
and 104°F (0°C and +40°C).
− The humidity should not
exceed 95%.
− Provide for the scrapping of
the material of normal wear
following strictly the respective
rules.
When your machine has to
stop activity, provide for the
appropriate waste disposal
of its materials, especially
oils, batteries and electronic
components, and considering
that the machine itself
has been, where possible,
constructed using recyclable
materials.
CORRECT USE
− Do not use the machine
on surfaces covered with
inflammable liquids or dusts
(for example hydrocarbons,
ashes or soot).
− The machine has to carry out
simultaneously the operations
of washing and drying.
Different operations must be
carried out in restricted areas
prohibited to non-authorized
personnel and the operator
has to wear suitable shoes.
− Signal the areas of moist
floors with suitable signs.
− Do not mix different
detergents, avoiding harmful
odours.
− Avoid brush operation
when the machine is standing
still in order to prevent floor
damages.
− Before lifting the recovery
tank, make sure that it is
empty.
MAINTENANCE
− If the machine does not work
properly, check by conducting
simple maintenance
procedures. Otherwise, ask
for technical advice from an
authorized service center.
− For any cleaning and/or
maintenance operation take
off the power supply from the
machine.
− Where parts are required,
ask for ORIGINAL spare parts
from the distributor and/or
from an authorized dealer.
− Use only ORIGINAL brushes
indicated in the paragraph
“RECOMMENDED BRUSHES”.
− Restore all electrical
connections after any
maintenance operation.
− In case of fire, use a powder
based fire-extinguisher. Do not
use water.
− Do not use the machine in
explosive atmosphere.
Summary of Contents for TS120-S53-U
Page 20: ...20...