Electrical safeness:
•
Make sure that the plug will fit the wall outlet of your power supply without use of force. Contact an
authorized electrician to check if you have any doubts. Do not change anything by your own.
•
Avoid physical contact to grounded surfaces during usage.
•
Avoid moisture and wetness and do not plug in or use the tool in that kind of environment or when the unit
has become wet or moistly. Risk of electrical shock and danger of life !
•
Do not carry the unit by the cable.
•
Pull out the cable by grabbing the plug and do not just pull the cable. Avoid contact of the cable with sharp
edges, the running pad, heat, oil or any other liquids.
•
Just use extension cables which are permitted and certified in your country. Use an earth leakage circuit
breaker if you intend to use the unit outside. Contact an certified electrician for support.
•
Do not plug in the unit or turn it on if you recognize damaged cables, switches or wall outlets.
•
Unplug the unit for any carriage, maintenance or change of accessories.
•
Keep away the unit from children at any time.
•
Unplug the unit when it´s not in use.
Maintenance:
•
Ask your dealer to change or repair damaged or worn parts. Insist on original spare parts to avoid male
function which maybe will harm you or persons surrounding you.
•
Check the unit for clearance, cracks, off-set and free-movement of the movable parts before every use. If
you recognize any abnormality ask your dealer for support. Pls. consider that the reason of many
misadventures and accidents are bad service and bad maintenance.
•
Unplug the unit before maintain after usage. We recommend to use an air blow gun to remove dust and
dirt. Clean the louvre of the motor housing to avoid overheating in use.
•
Do not use wet cloths to avoid electrical shock on next use.
Tools application:
•
Polishing surfaces, especially painted surfaces like automobiles/vehicles
Instruction:
•
Take care the voltage of your wall outlet will fit the requirements of this unit.
•
Only use the tool for the intended application.
•
Depending on the delivery status you may have to connect the pad to the unit with the enclosed screw.
•
You can fix the operation-switch with the small button on the side of the unit for comfortable use. Press the
operation-switch again to stop.
•
Check and switch off the unit if you recognize abnormal vibration or noise and fix the troubleshooting
before use it again.
•
This polisher is equipped with a 21mm orbital stroke for high performance results. The vibration is higher
comparing with no orbital units.
•
The free-speed is adjustable between 1.700 and 4.200 rpm.
Special instructions:
The written and spoken information and recommendations which we provide to support the purchase/user, are the
result of previous experience and the latest findings. Because of the manifold possibilities for use and processing
conditions, this information is without obligation and do not constitute a contractual legal relationship or any
supplementary obligations of the sales contract.
In any event, the purchaser holds responsibility for checking suitability for the intended use himself. Always read
the safety warnings of compounds and polishing agents and contact the manufacturer in case of doubt.
Our liability and responsibility is based exclusively on our general terms and conditions of business and are not
expanded on by either this information or the technical advice of our technical field staff.
Environment information:
An electrical devices is a hazardous waste. Do not dispose them in the household garbage.
Pls. consider your local directives or ask your dealer for support how to dispose.