•
Keep all parts in good working condition and all
hardware tightened. Replace all worn or damaged
decals.
•
Use only accessories, attachments, and
replacement parts approved by Toro.
Blade Safety
A worn or damaged blade can break, and a piece of
the blade could be thrown toward you or bystanders,
resulting in serious personal injury or death.
•
Inspect the blade periodically for wear or damage.
•
Use care when checking the blades. Wrap the
blades or wear gloves, and use caution when
servicing the blades. Only replace or sharpen the
blades; never straighten or weld them.
•
On multi-bladed machines, take care as rotating 1
blade can cause other blades to rotate.
Safety and Instructional Decals
Safety decals and instructions are easily visible to the operator and are located near any area
of potential danger. Replace any decal that is damaged or missing.
decal94-6304
94-6304
1.
Clutch
3.
Turn clockwise to
disengage.
2.
Turn counterclockwise to
engage.
decal94-6305
94-6305
1.
Clutch
3.
Turn counterclockwise to
disengage.
2.
Turn clockwise to engage.
decal137-9706
137-9706
1.
Cutting hazard of the hand or foot—shut off the engine,
remove the key or disconnect the spark plug, wait for all
moving parts to stop, and read the
Operator’s Manual
before performing maintenance.
4
