Introduction
This product complies with all relevant European directives,
for details please see the separate product specific Declaration
of Conformity (DOC) sheet.
This reel-blade lawnmower is mounted to a ride-on machine
and is intended to be used by professional, hired operators in
commercial applications. It is primarily designed for cutting
grass on well-maintained lawns in parks, golf courses, sports
fields, and on commercial grounds. It is not designed for
cutting brush, mowing grass and other growth alongside
highways, or for agricultural uses.
Read this information carefully to learn how to operate and
maintain your product properly and to avoid injury and
product damage. You are responsible for operating the
product properly and safely.
You may contact Toro directly at www.Toro.com for product
and accessory information, help finding a dealer, or to register
your product.
Whenever you need service, genuine Toro parts, or additional
information, contact an Authorized Service Dealer or Toro
Customer Service and have the model and serial numbers of
your product ready. Figure 1 identifies the location of the
model and serial numbers on the product. Write the numbers
in the space provided.
Figure 1
1.
Location of the model and serial numbers
Model No.
Serial No.
This manual identifies potential hazards and has safety
messages identified by the safety alert symbol (Figure 2),
which signals a hazard that may cause serious injury or death
if you do not follow the recommended precautions.
Figure 2
1.
Safety alert symbol
This manual uses 2 other words to highlight information.
Important
calls attention to special mechanical information
and
Note
emphasizes general information worthy of special
attention.
Contents
Introduction .................................................................. 2
Safety ........................................................................... 3
Safety and Instructional Decals ................................. 3
Setup ............................................................................ 4
1 Inspection............................................................ 4
2 Cutting Unit Kickstand .......................................... 4
3 Adjusting the Rear Shield ....................................... 5
4 Mount the Counter Weights.................................... 5
5 Installing the Tipper Roller Kit (Optional)................. 6
6 Installing the Fixed Plate Kit (Optional).................... 6
Product Overview .......................................................... 8
catalog for part numbers) ...................................... 8
Operation ..................................................................... 9
Adjustments ........................................................... 9
Height of Cut Chart Terms ......................................10
Height of Cut Chart ................................................11
Servicing Bedknife..................................................15
Maintenance .................................................................16
Lubrication............................................................16
Adjusting the Reel Bearings......................................16
Servicing the Bedbar ...............................................17
Servicing the HD Dual Point Adjusters
(DPA) ...............................................................18
Servicing the Roller.................................................19
© 2014—The Toro® Company
8111 Lyndale Avenue South
Bloomington, MN 55420
2
Contact us at www.Toro.com.
Printed in the USA.
All Rights Reserved
