Product Overview
Specifications
Weight
27 inch 5 Blade – 67 kg (148 lb.)
27 inch 8 Blade – 69 kg (153 lb.)
27 inch 11 Blade – 72 kg (158 lb.)
32 inch 8 Blade – 76 kg (167 lb.)
Cutting Unit Accessories and Kits (see
parts catalog for part numbers)
Note:
All accessories and kits are 1 per cutting unit unless
otherwise specified.
Grass Basket Kit:
A series of clipping collection baskets
attached to the cutting units to collect grass clippings.
Tipper Roller Kit:
An adjustable bracket installed on the
traction unit frame, which when the cutting units are raised,
the center cutting unit front roller contacts the bracket and
causes the rear roller to rise for increased ground clearance.
Recommended for higher heights of cut.
Rear Roller Brush Kit:
A high speed, high contact brush
that keeps the rear roller free of grass and debris, which
maintains a consistent height of cut and prevents clumping.
This leads to a better after-cut appearance.
Comb/Scraper Kit:
A fixed comb installed behind the front
roller which helps reduce grain and spongy turf by standing
up the grass before cutting. A scraper for the front Wiehle
roller is included in the kit.
Fixed Plate Kit:
Bolting on fixed plates over the suspension
mounting links removes the pitch movement of the cutting
unit. Recommended for use on level surfaces and for higher
heights of cut (greater than 38 mm [1.50 inches]). Because
the front roller is removed when using the fixed plates, the
quality of cut (efficiency of cut) is increased.
Shoulder Roller:
Helps reduce over-lap marks for warm
season grasses (Bermuda, Zoysia, Paspalum). The shoulder
roller should only be used as the front roller on the center
(rear) cutting unit.
Collar Kit (6 needed per roller):
Helps reduce over lap
marks for warm season grasses (Bermuda, Zoysia, Paspalum).
This kit is installed on the outer three grooves of the existing
Wiehle roller, but is not as aggressive as the Shoulder roller.
Short Rear Roller:
Helps reduce double roller marks for cool
season grasses (Bent, Blue grass, Rye). The short roller is only
to be used as the rear roller on the center (rear) cutting unit.
Full Front Roller:
Helps produce more pronounced striping
(repeated cutting in the same direction/path), however,
effective height of cut is raised and quality of cut is reduced.
Scrapers (Wiehle, Shoulder, Rear roller, Full Front
Roller):
Fixed scrapers for all optional rollers are available
for reducing grass build up on rollers which can affect height
of cut settings.
Roller Rebuild Kit:
Includes all the bearings, bearing nuts,
inner seals and outer seals required to rebuild a roller.
Roller Rebuild Tool Kit:
Includes all the tools and the
installation instructions required to rebuild a roller with the
roller rebuild kit.
8
