Fuel Pump
g346550
Figure 142
1.
Fuel pump
3.
Fuel filter
2.
Fuel hose (discharge)
4.
Fuel stop solenoid
The fuel pump is attached to the frame just outboard of the fuel injection pump.
IMPORTANT
When testing the fuel pump, ensure that the pump is not operated
without fuel.
DANGER
Diesel fuel is highly flammable.
•
Use caution whenever you handle diesel fuel.
•
Do not smoke while testing the fuel pump.
•
Do not test the fuel pump while the engine is hot.
•
Ensure that there is adequate ventilation when testing.
•
Always wipe up any spilled diesel fuel before starting the engine.
Testing the Fuel Pump Capacity
1. Park the machine on a level surface, lower the cutting deck, set the parking
brake, and shut off the engine. Ensure that the key switch is in the OFF
position.
2. Unlatch the hood and raise it.
3. Disconnect electrical connector from the fuel stop solenoid to prevent the
engine from firing.
4. Disconnect fuel hose (pump discharge) from the fuel filter.
5. Make sure fuel hoses attached to the fuel pump are free of obstructions.
6. Place fuel hose (pump discharge) into a large, graduated cylinder sufficient
enough to collect 1 liter (33.8 fluid ounces).
Reelmaster
®
3100-D/3105-D
Page 6–43
Electrical System: Component Testing
20252SL Rev A
Summary of Contents for 03200 Reelmaster 3100-D
