This product complies with all relevant European
directives; for details, please see the separate product
specific Declaration of Conformity (DOC) sheet.
It is a violation of California Public Resource Code
Section 4442 or 4443 to use or operate the engine on
any forest-covered, brush-covered, or grass-covered
land unless the engine is equipped with a spark
arrester, as defined in Section 4442, maintained in
effective working order, or the engine is constructed,
equipped, and maintained for the prevention of fire.
The enclosed engine owner's manual is supplied
for information regarding the US Environmental
Protection Agency (EPA) and the California Emission
Control Regulation of emission systems, maintenance,
and warranty. Replacements may be ordered through
the engine manufacturer.
Operating this machine between 1,500 and 2,400
m (5,000 to 8,000 ft) above sea level requires
the high-altitude kit. See your authorized Toro
distributor.
WARNING
CALIFORNIA
Proposition 65 Warning
The engine exhaust from this product
contains chemicals known to the State of
California to cause cancer, birth defects,
or other reproductive harm.
Use of this product may cause exposure
to chemicals known to the State of
California to cause cancer, birth defects,
or other reproductive harm.
Introduction
This machine is a walk-behind, reel-blade lawn mower
intended to be used by professional, hired operators
in commercial applications. It is primarily designed for
cutting grass on well-maintained lawns in parks, golf
courses, sports fields, and on commercial grounds. It
is not designed for cutting brush, mowing grass and
other growth alongside highways, or for agricultural
uses.
Important:
To maximize the safety, performance,
and proper operation of this machine, carefully
read and fully understand the contents of this
Operator’s Manual
. Failing to follow these
operating instructions or to receive proper
training may result in injury. For more information
on safe operating practices, including safety tips
and training materials, go to www.Toro.com.
Whenever you need service, genuine Toro parts, or
additional information, contact an authorized Toro
distributor and have the model and serial numbers of
your product ready. The model and serial numbers
are located on a plate on the rear frame. Write the
numbers in the space provided.
Important:
With your mobile device, you can
scan the QR code (if equipped) on the serial
number decal to access warranty, parts, and other
product information.
g235302
Figure 1
1.
Model and serial number location
Model No.
Serial No.
This manual identifies potential hazards and has
safety messages identified by the safety-alert symbol
(
), which signals a hazard that may cause
serious injury or death if you do not follow the
recommended precautions.
g000502
Figure 2
Safety-alert symbol
This manual uses 2 words to highlight information.
Important
calls attention to special mechanical
information and
Note
emphasizes general information
worthy of special attention.
© 2018—The Toro® Company
8111 Lyndale Avenue South
Bloomington, MN 55420
2
Contact us at www.Toro.com.
Printed in the USA
All Rights Reserved
