7
Installing the Grass Basket
Parts needed for this procedure:
1
Grass basket
Procedure
Grasp the basket by the top lip and slide it onto the
basket mounting rods (
g007609
Figure 12
1.
Grass basket
2.
Basket mounting rod
Note:
Model 04056 only—
When you adjust the
cutting unit to a higher height of cut, you can lower the
basket by removing each basket mounting rod and
installing each on the opposite side of the machine.
8
Breaking in the Machine
No Parts Required
Procedure
Only 8 hours of mowing operation is required for the
break-in period.
The first several hours of operation are critical to future
dependability of the machine. You must monitor the
machine performance closely so that minor difficulties,
which could lead to major problems, are noted and
can be corrected. During the first few hours of
operation, inspect the machine frequently for signs of
oil leakage, loose fasteners, or any other malfunction.
Refer to the engine owner’s manual for the
recommended break-in-period oil change and
maintenance procedures.
12