Form No. 3369-988 Rev C
LED Light Kit
Walk-Behind Greensmaster
®
Flex 1800/2100 and eFlex 1800/2100
Mowers Equipped with Subaru EX13 or Lithium Ion Battery
Model No. 04265
Installation Instructions
Installation
Loose Parts
Use the chart below to verify that all parts have been shipped.
Description
Qty.
Use
Wire harness – LED
1
Wire harness – Power supply (Gas models
only)
1
LED light with mounting hardware (1 bolt, 1
washer, 1 nut)
2
Flange nut
6
Washer
2
Right bar
1
Left bar
1
Switch
1
Bolt (5/16 x 1 inch)
2
Bolt (5/16 x 1–1/4 inch)
4
Cable tie
5
Installation Instructions
1
Parts Catalog
1
Installing the LED light kit.
Note:
Right and left are determined from the standard
operating position.
© 2013—The Toro® Company
8111 Lyndale Avenue South
Bloomington, MN 55420
Register at www.Toro.com.
Original Instructions (EN)
Printed in the USA.
All Rights Reserved