Product Overview
g014674
Figure 11
1.
Engine
5.
Steering wheel
2.
Roll bar
6.
Traction pedal
3.
Control panel
7.
Footrest
4.
Seat
8.
Cutting units
Controls
Traction Pedal
The traction pedal (
) has 3 functions:
to make the machine move forward, to move it
backward, and to stop the machine. Press the top
of the pedal to move forward and the bottom of the
pedal to move backward or to assist in stopping when
moving forward. Also, allow the pedal to move to the
neutral position to stop the machine. For your comfort,
do not rest the heal of your foot on the reverse pad of
the traction pedal when you are driving the machine
forward. (
).
g014603
Figure 12
1.
Traction pedal—forward
3.
Steering-arm-locking
pedal
2.
Taction pedal—reverse
g005105
Figure 13
Ground speeds are as follows:
•
3.2 to 8 km/h (2 to 5 mph) forward mowing speed
•
16 km/h (10 mph) maximum transport speed
•
4.0 km/h (2.5 mph) reverse speed
Steering-Arm-Locking Pedal
Press the pedal (
) and raise or lower the
steering arm for operator comfort, then, release the
pedal to lock the arm in place.
Throttle Lever
Use the throttle lever (
) to control the speed
of the engine. Move the throttle lever toward the F
AST
position to increases the engine speed; move it toward
the S
LOW
position to decrease the engine speed.
Note:
You cannot stop the engine using the throttle
lever.
15
