2.
Install the armrest to the seat using the 2
carriage bolts and flange nuts that you removed
previously (
Note:
If you have a diesel machine, install the
spacer removed in
(page 1)
.
g195603
g195604
Figure 5
1.
Armrest
3.
Carriage bolt
2.
Armrest bracket
3.
Connect the open connector in the main wire
harness (located to the right rear of the seat) to
the short wire harness that came with the seat
(
).
g015301
Figure 6
(Premium seat harness shown)
1.
Open connector on the main wire harness
2.
Short wire harness from the kit
4.
Connect the connector on the short wire harness
to the open port on the back of the seat (premium
seat) or under the seat (standard seat).
5.
Use cable ties to secure the wire harness to the
choke/throttle cable.
4
Summary of Contents for 04718
Page 8: ......
