Removing the Electric Motor (continued)
5. Remove the 4 socket-head screws (item 3 in
) that secure the
electric motor to the motor adaptor (4).
6. Carefully slide the electric motor from the transmission, and remove the
motor from the machine.
7. Remove the key (7) from the motor shaft.
8. Remove and discard the closed cell foam seal (item 6 in
) from
the motor shaft.
Installing the Electric Motor
1. Install the closed cell foam seal (6) onto the electric motor shaft.
2. Apply a coat of anti-seize to the key (7) and install the key onto the motor
shaft..
3. Position the electric motor to the transmission, align the key of the motor
shaft to the transmission coupler, and insert the motor shaft into the coupler.
Slide the motor fully to the motor adaptor (4).
4. Secure the electric motor to the motor adaptor (4) with the 4 socket-head
screws (3).
5. Connect the electric motor connections to the machine wire harness.
6. Connect the battery pack; refer to
Connecting the Lithium Battery Pack
(page 5–3)
.
Greensmaster
®
e1021/e1026
Page 5–43
Electrical System: Service and Repairs
20246SL Rev A
Summary of Contents for 04831
