Disassembling the Handle Assembly (continued)
25. Remove the handle adjuster assembly from the upper receiver weldment and
separate handle torsion spring (23) and spring spacer (24) from the handle
adjuster assembly (22).
g337168
Figure 86
1.
LH bail bracket
7.
Handle mount
13.
Spacer (2 each)
2.
Bolt (2 each)
8.
Flange nut (4 each)
14.
Delta screw (2 each)
3.
Flange bushing (4 each)
9.
Nut (2 each)
15.
RH bail bracket
4.
Clutch bail assembly
10.
Upper receiver weldment
16.
Handle
5.
Clutch bail link
11.
Bolt (2 each)
17.
Bolt (2 each)
6.
Compression spring
12.
Flange bushing (2 each)
26. Remove the 2 nuts (item 8 in
) and 2 bolts (17) that secures the
handle (16) to handle mount (7). Remove the handle from the clutch bail
assembly and the handle mount.
27. If necessary, remove the 2 screws (14) that secures the LH and RH bail
brackets (1 and 15) to the handle (16).
28. Remove the flange nut (8), and bolt (2) that secure the clutch bail link (5) to
the handle mount (7). Remove the 2 flange bushings (3) and spacer tube
(13) from the handle mount.
Controls, Wheels and Accessories : Service and Repairs
Page 6–16
Greensmaster
®
e1021/e1026
20246SL Rev A
Summary of Contents for 04831
