Disassembling the Handle Assembly (continued)
29. Remove the flange nut (8) and bolt (2) that secure the clutch bail assembly
(4) to the handle mount (7). Remove the clutch bail assembly from the
handle mount. Remove the compression spring (6), 2 flange bushings (3)
and spacer tube (13) from the handle mount.
30. Remove the 2 nuts (9) and 2 bolts (11) that secures the handle mount (7)
to the upper receiver weldment (15). Remove the handle mount from the
upper receiver weldment.
g337210
Figure 87
1.
Lower handle assembly
4.
Nut
2.
Bolt
5.
Frame assembly
3.
Washer (2 each)
31. If necessary, remove the nut (item 4 in
), washers (3) and bolt (2)
that secures the lower handle assembly (1) to the frame assembly (5).
Assembling the Handle Assembly
1. If removed, install the lower handle assembly (item 1 in
) onto the
frame assembly (5) and secure with the bolt (2), washers (3) and nut (4).
2. Lift the lower handle assembly to maximum top position and torque tighten
the bolt (2) to
5.6 to 6.2 N·m (50 to 55 ft-lb)
.
3. Install the handle mount (item 7 in
) to the upper receiver weldment
(10) and secure with 2 bolts (11) and 2 nuts (9).
4. Position the clutch bail link (5) in the handle mount (7). Install the spacer tube
(13) and 2 flange bushings (3) to the handle mount. Secure the clutch bail
link to the handle mount with the bolt (2) and flange nut (8).
Greensmaster
®
e1021/e1026
Page 6–17
Controls, Wheels and Accessories : Service and Repairs
20246SL Rev A
Summary of Contents for 04831
