Removing the Kickstand (continued)
1. Park the machine on a level surface. Ensure that the key switch is in OFF
position and the traction control is in NEUTRAL.
2. Disconnect the battery pack; refer to
Connecting the Lithium Battery Pack
(page 5–3)
.
3. Pivot the kickstand up and hold against the frame stops.
4. Remove the bolt (item 11 in
) that secures the spring mount pin (3)
and torsion spring (2) to the kickstand (16).
5. Remove the spring mount pin (3) and torsion spring (2) from the kickstand
(16).
6. Remove the bolt (11), spacer (10) and nut (5) that secures the kickstand
(16) to the frame (9).
7. Remove the kickstand (16) from the frame (1).
8. If necessary, remove the spring retainer (14) by removing the nut (15),
washer (13) and bolt (12).
9. If necessary, remove the spacers (10) from the kickstand (16).
Installing the Kickstand
g337280
Figure 89
1.
Kickstand (raised)
3.
Kickstand (lowered)
2.
Torsion spring
1. If removed, install the spacers (10) to the kickstand (16).
2. If removed, secure the spring retainer (14) to kickstand with the bolt (12),
washer (13) and nut (15).
3. Secure the kickstand (16) to the frame (9) with the torsion spring (2), spring
mount pin (3) and bolt (11).
4. Secure the kickstand (16) to the frame (9) with spacer (10), bolt (11) and
nut (5).
5. Connect the battery pack; refer to
Connecting the Lithium Battery Pack
(page 5–3)
.
Greensmaster
®
e1021/e1026
Page 6–21
Controls, Wheels and Accessories : Service and Repairs
20246SL Rev A
Summary of Contents for 04831
