Assembling the Transport Wheel
1. If the shoulder screws were removed from the hub, apply Loctite #242 (or
equivalent) to the threads of the shoulder screws. Secure the torsion spring
and retaining lever to the hub with the shoulder screws.
2. Assemble the tire, tube, and deep rim.
3. Install the shallow rim into the tire. Align and secure the shallow rim tot he
deep rim with 4 bolts and 4 flange nuts. Tighten the fasteners.
4. Install the hub into the deep rim. Secure the hub to the deep rim with the 3
bolts and 3 lock washers. Tighten the fasteners.
5. Inflate the tire to
83 to 103 kPa (12 to 15 psi)
.
Installing the Transport Wheel
1. Ensure that the machine is parked on a level surface.
2. Support the machine onto the kickstand.
3. Slide the transport wheel completely onto the wheel hex shaft until the wheel
retaining lever is secured into the groove onto the wheel hex shaft.
Controls, Wheels and Accessories : Service and Repairs
Page 6–24
Greensmaster
®
e1021/e1026
20246SL Rev A
Summary of Contents for 04831
