Assembling the Reel Drive Assembly (continued)
19. Install the bolt (28), washer (27) and nut (25) to the idler arm (26) and reel
drive housing (22). Do not tighten the bolt (28).
g258764
Figure 16
1.
Press flush
20. If removed, install the expansion plug (13) to the reel drive cover (14) and
press flush to outer surface (refer to
) of the reel drive cover.
21. Install the reel drive belt; refer to
Installing the Reel Drive Belt (page 4–6)
.
22. Adjust the reel drive belt tension; refer to
Adjusting the Reel Drive Belt (page
.
Installing the Reel Drive Assembly
Note:
Refer to
during this procedure.
1. Place the V-ring seal (5) into the reel drive assembly (6).
2. Install telescopic coupler (8) to the reel drive shaft.
3. Install the reel drive assembly (6), washers (3), spring washer (4) and spacers
(2 and 11) to the RH side plate (9) and secure the reel drive assembly (6)
with 2 screws (1) and nut (7).
4. Slide the telescopic coupler (8) to the transmission gear shaft (10).
5. Connect the battery pack; refer to
Connecting the Lithium Battery Pack
(page 5–3)
.
Traction and Reel Drive Systems: Service and Repairs
Page 4–10
Greensmaster
®
e1021/e1026
20246SL Rev A
Summary of Contents for 04831
