Disassembling the Drum Drive Assembly
g258879
Figure 21
1.
Traction drum (2 each)
5.
Drum spindle
9.
Spacer
2.
Bolt (8 each)
6.
Seal (2 each)
10.
Drum hub
3.
Lock washer (8 each)
7.
Ball bearing (2 each)
11.
Shoulder bolt (6 each)
4.
Drum hub plate (2 each)
8.
Spacer
12.
Lock nut
Note:
Refer to
during this procedure.
1. Remove the 4 bolts (2) and lock washers (3) that secures the drum hub plate
(4) to the drum spindle (5).
2. Remove the 4 bolts (2) and lock washers (3) that secures the drum hub
plate (4) to the drum hub (10).
3. Remove the shoulder bolts (11) that secures the drum hub plate (4) to the
traction drum (1).
4. Remove the lock nut (12) that secures the drum spindle (5) and drum hub
(10) together. Carefully slide and remove the drum spindle (5) out of the
drum hub (10).
5. Remove the 2 seals (6) from the drum hub (10). Use a press to remove the 2
ball bearings (7) and a bearing spacer (8) from the drum hub (10). Discard
the ball bearings.
Traction and Reel Drive Systems: Service and Repairs
Page 4–18
Greensmaster
®
e1021/e1026
20246SL Rev A
Summary of Contents for 04831
