1
All Rights Reserved
Printed in the USA
2002 by The Toro Company
8111 Lyndale Avenue South
Bloomington, MN 55420-1196
36
Recycler Kit
Proline Mid–Size Floating Deck Mowers
Part No. 105–3180
Form No. 3328-137
Installation Instructions
Loose Parts
Note: Use the chart below to identify parts for assembly.
DESCRIPTION
QTY.
USE
Baffle
Bolt, 5/16 x 1 inch
Bolt, 5/16 x 2–3/4 inch
Lock nut, 5/16 inch
1
2
2
4
Installing the baffle
Kicker
Bolt 5/16 x 1 inch
Lock nut, 5/16 inch
2
4
4
Installing the kickers
Recycler
blade
2
Installing the blades
Preparing the Mower
1. Remove the mower and belt. See the Operator’s Manual
for instructions.
2. Thoroughly clean the mower. All debris must be
removed to ensure kickers and baffle will fit properly
against mower.
3. Repair all bent or damaged areas of mower and replace
any missing parts.
4. Tip the mower upside down and block up ends to ease
installation of recycler components.
Open holes in the mower exposes you and others to
thrown debris. Debris thrown out of holes in the
mower can cause injury.
•
Never operate mower without hardware
mounted in all holes in mower.
•
Install hardware in mounting holes when
mulching baffle is removed.
Warning
