Form No. 3356-517 Rev A
Valve Update Kit
For Model 22910 Vibratory Plow Attachments
Model No. 112-4881
Installation Instructions
Important:
If you intend to use a model 22910 vibratory plow with a TX 500 series traction
unit, you must first install this kit on the plow. Using a 22910 vibratory plow on a TX 500 series
traction unit without this kit will cause major damage to the plow.
Installation
Loose Parts
Use the chart below to verify that all parts have been shipped.
Step
Description
Qty.
Use
1
No parts required
–
Prepare the plow.
Valve plate
1
Bolt (5/16 x 1-1/4 inches)
2
Bolt (5/16 x 3-1/2 inches)
3
Thread locking compound (not
supplied)
-
Flange-head nut
5
Lock washer
1
Flow valve
1
2
Clamp plate
1
Install the ow valve.
Hose, number 112-2766
1
Hose, number 105-4333
1
Hose, number 112-2768
1
Hose, number 112-2769
1
Elbow tting
3
Straight tting
1
3
T-tting
1
Connect the hoses.
© 2006—The Toro® Company
8111 Lyndale Avenue South
Bloomington, MN 55420
Register at www.Toro.com.
Original Instructions (EN)
Printed in the USA.
All Rights Reserved
