Form No. 3389-123 Rev C
Multi Pro
®
WM Turf Sprayer Finishing Kit
Automatic Workman
®
Utility Vehicle
Model No. 131-3301
Installation Instructions
WARNING
CALIFORNIA
Proposition 65 Warning
This product contains a chemical or chemicals known to the State of California to
cause cancer, birth defects, or reproductive harm.
Use of this product may cause exposure to chemicals known to the State of California
to cause cancer, birth defects, or other reproductive harm.
Installation
Loose Parts
Use the chart below to verify that all parts have been shipped.
Procedure
Description
Qty.
Use
1
No parts required
–
Prepare the machine.
Hydraulic motor
1
Shaft guard
1
Motor bracket
1
Flange-head bolt (1/2 x 1-1/2 inches)
2
Flange nut (1/2 inch)
2
Anti-rotation bracket
1
Flange-head bolt (5/16 x 3 inches)
1
Flat washer
1
Compression spring
2
Flange locknut (5/16 inch)
1
Straight hydraulic fitting (7/8 inch)
2
Hydraulic hose (1/2 x 17 inches)
2
2
Male coupler
2
Prepare the hydraulic motor.
Shaft coupler
1
Woodruff key
1
Square-head screw
4
Flange-head bolt (3/8 x 1 inch)
2
3
Flange nut (3/8 inch)
2
Install the hydraulic motor to the
hydraulic pump.
4
No parts required
–
Install the hydraulic hoses from the
motor to the high-flow system.
© 2016—The Toro® Company
8111 Lyndale Avenue South
Bloomington, MN 55420
Register at www.Toro.com.
Original Instructions (EN)
Printed in the USA
All Rights Reserved
*3389-123* C
