Form No. 3408-237 Rev A
Brake Cable Kit
21in Heavy-Duty Recycler
®
/Rear Bagger Lawn Mower
Model No. 133-2680
Model No. 136-7000
Installation Instructions
Use the appropriate kit for your lawn mower model as follows:
•
Lawn mower model no. 22295—kit no. 133-2680
•
Lawn mower model no. 22297—kit no. 136-7000
WARNING
CALIFORNIA
Proposition 65 Warning
This product contains a chemical or chemicals
known to the State of California to cause cancer,
birth defects, or reproductive harm.
Installation
Loose Parts
Use the chart below to verify that all parts have been shipped.
Procedure
Description
Qty.
Use
Brake cable
1
Cable anchor
1
2
Screw
1
Install the brake cable.
1
Removing the Brake Cable
No Parts Required
Procedure
1.
Shut off the engine and wait for all moving parts to
stop.
2.
Disconnect the spark-plug wire from the spark plug.
3.
Disconnect the brake cable from the blade-control bar
(
or
as appropriate for your kit); keep
the bolt and the nut.
g187498
Figure 1
Kit 133-2680
1.
Bolt (keep)
3.
Cable anchor
2.
Screw (discard)
4.
Nut (keep)
© 2016—The Toro® Company
8111 Lyndale Avenue South
Bloomington, MN 55420
Register at www.Toro.com.
Original Instructions (EN)
Printed in the USA
All Rights Reserved
*3408-237* A
Summary of Contents for 133-2680
Page 4: ......
