Installing the Center Spray-Valve
Connector
1.
Align the wire insulation colors of the DIN harness to
the wire insulation colors of the 3-pin adapter for the
center spray valve as shown in the wire table for the
center spray valve.
Wiring Table—Center Spray Valve
Wire color codes—DIN wire
harness
Wire color codes—3-pin
adapter
Brown
Pink
Blue
Black
Yellow/green
White
2.
Insert the wire of the DIN wire harness into the
butt-splice connector of the 3-pin adapter
3.
Center the crimping tool over the butt-splice connector
and wires and crimp the connector securely.
4.
Repeat steps
and
for the 2 remaining wires.
5.
Use a heat gun to shrink the insulating sleeves of the
3 butt-splice connectors.
Installing the Left Spray-Valve
Connector
1.
Align the wire insulation colors of the DIN harness to
the wire insulation colors of the 3-pin adapter for the
left spray valve as shown in the wire table for the left
spray valve.
Wiring Table—Left Spray Valve
Wire color codes—DIN wire
harness
Wire color codes—3-pin
adapter
Brown
Pink
Blue
Black
Yellow/green
White
2.
Insert the wire of the DIN wire harness into the
butt-splice connector of the 3-pin adapter
3.
Center the crimping tool over the butt-splice connector
and wires and crimp the connector securely.
4.
Repeat steps
and
for the 2 remaining wires.
5.
Use a heat gun to shrink the insulating sleeves of the
3 butt-splice connectors.
Installing the Rate-Valve Connector
1.
Cut off the butt-splice connectors for the pink wire
and black wires of the 4-pin adapter (
Figure 37
1.
4-pin adapter
3.
Pink wire
2.
Black wire
4.
Butt-splice connector
2.
Strip 8 mm (5/16 inch) of insulation from the pink and
black wires of the 4-pin adapter (
Note:
You will connect the pink and black wires of
the 4-pin adapter in
Installing the Master-Spray Valve
.
Figure 38
1.
Black wire (4-pin adapter)
3.
Removed section of wire
insulation—8 mm (5/16
inch)
2.
Pink wire (4-pin adapter)
3.
Align the brown wire of the DIN harness with the gray
wire of the 4-pin adapter for the rate valve (
refer to the wire table for the rate valve.
19
Summary of Contents for 136-0372
Page 61: ...Schematics Flow Diagram Rev A 61...
Page 62: ...Notes...
Page 63: ...Notes...
Page 64: ......
