2
Assembling the Upper
Trimmer Mount Assembly
Parts needed for this procedure:
1
Upper trimmer mount bracket
1
Large fist clamp
1
Large backer plate
2
Carriage bolt (1/4 x 1-1/2 inches)
2
Flange nut (1/4 inch)
Procedure
Assemble the upper trimmer mount assembly (
g249810
Figure 2
1.
Flange nut (1/4 inch)
4.
Upper trimmer mount
bracket
2.
Large backer plate
5.
Carriage bolt (1/4 x 1-1/2
inches)
3.
Large fist clamp
3
Installing the Support
Bracket
Parts needed for this procedure:
1
Support bracket
2
Tube spacer
2
Carriage bolt (3/8 x 3 inches)
2
Flange nut (3/8 inch)
Procedure
1.
Lower the roll bar.
2.
Install the support bracket to the right post of the
roll bar using 2 tube spacers, 2 carriage bolts
(3/8 x 3 inches), and 2 flange nuts (3/8 inch) as
shown in
.
3.
Raise the roll bar.
g248751
Figure 3
1.
Support bracket
3.
Tube spacer
2.
Flange nut (3/8 inch)
4.
Carriage bolt (3/8 x 3
inches)
3
Summary of Contents for 137-9769
Page 7: ...Notes ...
Page 8: ......
