Figure 6
5. Attach the handle brackets (Figure 7) to the lower
handle sides.
Figure 7
1. Handle bracket (2)
3. Filling the Engine with Oil
Your mower does not come with oil in the engine.
1. Remove the dipstick (Figure 8).
Figure 8
2.
Slowly
pour oil into the oil fill tube until the oil level
reaches the Full line on the dipstick (Figure 8).
Do not
overfill.
(Max. fill: 20 oz. (0.59 l), type: SAE 30W
detergent oil with an API service classification of SF,
SG, SH, SJ, SL, or higher.)
3. Install the dipstick securely.
Important:
Change the engine oil after the first 5
operating hours; change it yearly thereafter. Refer
to Changing the Engine Oil.
4. Installing the Fuse
Model 20058 only
Your mower comes with a 40-amp fuse that protects the
electric starter.
Important:
You cannot start the mower with the
electric starter or charge the battery unless you install
the fuse.
1. Unclip both ends of the battery cover and remove it
(Figure 9).
Figure 9
2. Install the fuse in the fuse holder (Figure 10).
Figure 10
Note:
Your mower comes with a fuse in the your
owner’s packet and another fuse in the battery box.
3. Install the battery cover.
7
