Important:
Connect the attachment
hoses together to prevent hydraulic system
contamination during storage.
6. Install the protective covers onto the hydraulic
couplers on the traction unit.
7. Start the engine, tilt the mount plate forward, and
back the traction unit away from the attachment.
Securing the Traction Unit for
Transport
When transporting the traction unit on a trailer, always
use the following procedure:
Important:
Do not operate or drive the traction
unit on roadways.
1. Lower the loader arms.
2. Stop the engine.
3. Secure the traction unit to the trailer with chains or
straps using the tie-down/lift loops (Figure 3) to
secure the rear of the traction unit and the loader
arms/mount plate to secure the front of the traction
unit.
Lifting the Traction Unit
You can lift the traction unit using the tie-down/lift
loops as lift points (Figure 3).
25
Summary of Contents for 22319
Page 7: ...Slope Indicator 7...
Page 49: ...Schematics G007388 Electrical Schematic Rev B 49...
Page 50: ...Hydraulic Schematic Rev A 50...
Page 51: ...Notes 51...