decal131-0710
131-0710
1.
Warning—read the
Operator's Manual
.
7.
Cutting/severing hazard of hand or foot—wait for all moving
parts to stop before servicing; keep away from moving parts;
keep all guards and shields in place.
2.
Warning—receive training before operating the machine.
8.
Explosion hazard; electrocution hazard—call the local utilities
hotline before beginning work in an area.
3.
Warning—wear hearing protection.
9.
Crushing hazard—keep away from the bucket when operating
the machine; keep bystanders away from the machine.
4.
Warning—engage the parking brake, lower the bucket to the
ground, shut off the engine, and remove the key from the
ignition before leaving the machine.
10.
Tipping hazard—always move up or down slopes with the
bucket lowered; never drive on a slope with the bucket raised;
always operate with the heavy end uphill; always carry loads
low; never jerk the control levers; use a steady, even motion.
5.
Electrocution hazard, power lines—check for power lines in
the area before using the machine.
11.
Tipping hazard—do not make fast turns; always check behind
you before reversing the machine.
6.
Crushing hazard—keep away from pinch points; read
the
Operator's Manual
before servicing or performing
maintenance.
decal136-5824
136-5824
1.
Power socket
7.
Engine speed
2.
Hydraulic fluid—slow
8.
Lower/float the attachment.
3.
Hydraulic fluid—fast
9.
Tilt the attachment forward.
4.
Hydraulic attachment—neutral
10.
Raise the attachment.
5.
Hydraulic attachment—forward
11.
Tilt the attachment rearward.
6.
Hydraulic attachment—reverse
12.
Lever lock
12
Summary of Contents for 22327
