Figure 6
3.
Wipe off the dipstick end with a clean cloth.
4.
Insert the dipstick into the oil-fill tube, but
do not
screw it in.
5.
Remove the dipstick and read the oil level on the
dipstick (Figure 7).
•
If the oil level is too low, slowly pour a small
amount of oil into the oil-fill tube, wait 3 minutes,
and then repeat steps 3 through 5 until the oil level
is correct.
•
If the oil level is too high, drain the excess oil until
the oil level is correct. To drain the excess oil, refer
to Changing the Engine Oil (page 13).
Important:
If the oil level in the crankcase is
too low or too high and you run the engine,
you may damage the engine.
Figure 7
1.
Oil level is too low
3.
Oil level is correct
2.
Oil level is too high
6.
Install the dipstick into the oil-fill tube securely.
Important:
Change the engine oil after the first 5
operating hours
; change it yearly thereafter; refer
to Changing the Engine Oil (page 13).
Product Overview
Figure 8
1.
Spark plug
6.
Grass bag
2.
Oil fill/dipstick (not shown)
7.
Fuel-tank cap
3.
Recoil-start handle
8.
Cutting-height levers (4)
4.
Blade-control bar
9.
Air filter
5.
Self-propel drive bar
Figure 9
1.
Rear-discharge deflector (optional attachment; Toro part
89964)
Specifications
Model
Weight
Length
Width
Height
29639
34 kg
(75 lb)
144 cm
(57 inches)
54 cm
(21 inches)
145 cm
(39 inches)
6
Summary of Contents for 29639
Page 17: ...Notes 17 ...
Page 18: ...Notes 18 ...
