Checking the State of
Charge
You can view the exact state of charge of each
installed battery; turn the key to the A
CCESSORY
position (
). The position of each set of lights
corresponds to the related battery cavity. If the battery
state of charge is too low and needs to be charged, or
if there is no battery in the corresponding cavity, the
battery presence light does not turn on.
g348182
Figure 16
1.
State-of-charge lights
3.
Key switch in the
A
CCESSORY
position
2.
Battery presence lights
During Operation
Starting the Machine
Note:
Use the battery pack only in temperatures
that are within the appropriate range; refer to
Specifications (page 16)
.
1.
Ensure that the battery pack(s) are installed in
the machine; refer to
(page 16)
.
2.
Insert the electric-start key into the control panel
3.
Turn the key to the R
UN
position to turn on the
machine (
).
g347864
Figure 17
1.
Key switch in O
N
position
Activating ECO Mode
Using ECO mode may extend battery life by reducing
rotor speed; use ECO mode whenever you are
moving light snow, or moving snow a short distance.
Activate ECO mode using the ECO button as shown
in
g347866
Figure 18
1.
ECO mode button
17
Summary of Contents for 39924
